

SimpliPure
Introducing the highly efficient Genesis SimpliPure Tankless RO system.
Our SimpliPure system will purify up to 250 gallons per day with up to
75% less waste water and without the use of a bulky holding tank.
Innovative and Compact Design

SimpliPure is 50% smaller and will produce 8 times more water in a day than a conventional RO. SimpliPure can purify as much as 250 gallons of water in one day that it's available when you need it. That is a lot of water!
SimpliPure vs. Conventional Tank RO Systems
SimpliPure
- Compact tankless design
- Up to 250 GPD production
- Highly efficient 1:1 ratio of water production
- Constant flow design
- Quick change filters do not require water to be shut off
- No tools needed
- Filter life indicator
- Constant TDS monitoring
- Dual handle faucet for filtered or purified water
Conventional RO Systems:
- Much larger footprint
- Limited daily purified water of 50-75 gallons
- 4-5 gallons of waste water to create 1 gallon of purified water
- Requires water be turned off to change filters
- Requires tools to change filters
- Only holds 3.5 gallons of water
- No TDS Monitoring
- Single handle faucet only
Purified water… in a snap!
50% smaller and will produce 8 times more water in a day than a conventional RO.
No guessing on when you need to change your filters or if your water really is purified or not.
Even More Reasons to Love Genesis
-
Innovative and Compact Design
-
250 Gallons Per Day
-
Simple Design
-
Smart Monitoring
-
Quick Change Filter Design

Efficiency
The SimpliPure Reverse Osmosis system far exceeds standard RO systems on the market today. Most standard RO system will waste 4-5 gallons or more just to create 1 gallon of purified water. That is a 1:4 or 5 ratio. With the efficiency of SimpliPure systems your 1 gallon of purified water only discharges 1 gallon of water in most applications. That is a reduction of 75% less waste or more. That saves you money and saves the environment.

Simple Design and Smart Monitoring
The entire SimpliPure system is less than 6 inches wide, 16.5 inches deep and 16 inches high. It takes up half the space as an RO system with a tank. This simple and compact design also centrally locates all of the feed and drain connections in the back to help to minimize tubing from cluttering up your storage area under the sink.
Smart monitoring on your SimpliPure system is also a snap. No more guessing when you need to change your filters or if your water really is purified or not. The front display gives you filter life indicators right on your display so you know when it’s time to change your filters. Your display also provides internal TDS testing and monitoring system that shows real time water quality information so you know what you and your family are drinking.
Quick Change Filter Design
The old standard RO systems require that you shut off your water supply, shut off your tank, use a special tool and be careful because water is going to spill everywhere. With the SimpliPure design your filter changes really are simple. No need to shut off the water. No need for towels or buckets. Simply twist and pull. The multi chambered multimedia composite prefilter eliminates the need for up to 3 separate pre and postfilters. The extended life membrane means 2 years or more before you need to change your filters. When you do change your filters, it’s so easy a kid can do it!
Electrical Power Requirements | 110v |
---|---|
Warranty | Yes |