Fleck 5600 Timered 32,000 Grain Water Softener
About the product
- Ideal for homes with up to 6 people and less than 10 grains per gallon of hardness in the water
- Also ideal for for homes up to 4 people and less than 20 grains per gallon of hardness in the water
- Recommended for homes with up to 3 standard bathrooms or less
Still unsure this is the right system for you? Click here
Economy Water Softener Comparison
Fleck 5600 SXT
7 Year Warranty
EconoSoft systems use reliable Fleck 5600 style internal piston, seal, and spacer design covered by a full comprehensive 7-year warranty. (includes wearable parts)
5 Year Warranty
Fleck 5600 uses internal piston, seal and spacer design covered by a 5-year manufacturers defect warranty. (Does not include wearable parts)
QWA Gold Tested and Certified
EconoSoft systems are tested and certified Gold standard with the Water Quality Association.
Not Certified by WQA
Fleck 5600 is not a certified Gold system by the Water Quality Association.
10% Crosslink North American Resin
Econosoft water softeners are preloaded with Aldex 10% crosslink resin fully manufactured in the U.S. and Canada (high durability and )
8% Crosslink Imported Resin
Fleck 5600 water softeners use 8% crosslink imported resin.
Lifetime Tanks Warranty
Econosoft water softener resin and brine tanks carry a lifetime warranty.
10 Year Tanks Warranty
Fleck 5600 water softener resin and brine tanks carry a 10-year warranty.
One-Piece Meter Construction
EconoSoft water softeners are equipped with a one-piece meter-in-bypass assembly to minimize leaks.
Multi-piece Meter Construction
Fleck 5600 water softener meter assemblies contain an additional segment between the bypass and control valve.
Our Fleck 5600 timered water softener is one of the simplest and most reliable water softeners on the market today and it has been for over 25 years. It remains mechanically unchanged and for good reason. The Fleck 5600 has been typically used for rental systems due to its reliability.
Fleck 5600 System Includes:
- Fleck 5600 Timered Control
- 1.0 Cu. Ft. High Capacity Imported Resin 8% Crosslink
- Bypass with 3/4" or 1" Stainless Steel Or Noryl Plastic
- 9x48 Resin Tank (8x44 Tank with Turbulator)
- 15x17x34 Brine Tank
- Salt Grid
- 2310 Safety Overflow Assembly
- Service Flow Rate: 11 GPM @ 15 psi drop
- Required Backwash Rate: 2.0 gpm
- Regenration Type: Time Clock Intiated
- Electrical Power Requirements: 120v/60hz.
- Warranty: Control 5 Years/ Tanks 10 Years
- Dimensions (WxDxH): 27x15x56
Optional System Upgrades:
- Turbulator: Ideal for private well water supply when low levels (up to .5ppm) of iron are found. Helps keep resin cleaner over years of use. Not for use with fine mesh resin option
- Larger Brine Tank: Standard brine tank holds approximately 275lbs of salt. Upgrade for an extra 100lbs. of capacity
- Tank Jacket: Reduce tank sweating and improve the appearance of your resin tank
- 10% Crosslink resin (imported) resin upgrade for higher durability resin that will reduce resin degredation on chlorinated or even non-chlorinated waters. Helps your system perform more efficient over many years
- Fine Mesh Resin (imported) is designed for water with high iron levels over 0.5ppm and up to 5ppm. Reduces common fouling and allows for more efficient operation. Not for use with turbulator option
|Number of Bathrooms||2|
|Required Backwash Rate||No|
|Service Flow Rate||11 GPM|
|Internal Port Size||3/4"|
|Media Tank Size||9x48|
|Overall Dimensions (Width x Dimension x Height)||27x15x56|
|Electrical Power Requirements||No|
|Warranty||5 Years Control/ 10 Years Tanks|
|Ships with media in tank for easy installation||Yes|
Why Discount Water Softeners
There are a lot of places to buy water softeners but, no one knows water softeners better than Discount Water Softeners. With more than 25 years in commercial and residential water treatment all over the United States, we offer extensively trained and certified personnel to assist you before and after your purchase. We are water treatment experts.CUSTOMER SERVICE