Instructions for replacing the media in your CarbonSorb Whole House Filter
The procedure for replacing the CarbonSorb media is very simple. First, put the bypass valve in the bypass mode and unscrew the valve head from the bypass. Next, unscrew the valve head from the fiberglass tank and dump out the water and spent CarbonSorb media. Cover the distributor tube with tape and pour in the replacement media using the funnel provided. Be sure to reattach the tank to the bypass and open the water supply slowly until the tank is filled with water and put into bypass and flush the media for 40 minutes or until the water flows clear. Reopen the bypass and you are ready to go.
The spent CarbonSorb media is environmentally friendly and does not require any special methods of disposal. It is non hazardous.